Cammed 6
Member
- Joined
- Feb 21, 2023
- Messages
- 55
- Reaction score
- 6
- Points
- 8
- Age
- 31
- Location
- Christchurch
- Members Ride
- Vn ss, 5L vn calais
Hi guys in the middle of putting my gearbox back in my vn v6 its been out a while but its just been sitting on the shelf so nothings changed I installed a new clutch same as what it had previously
now ive gone to put it in thats all well and good bolted up etc now ive gone to hook up the clutch cable and the fork is just moving freely and not making contact with the pressure plate
I’ve measured the pivot point distance on the fork and that’s correct, the release bearing is the same as what it previously had any ideas on what it could be?
now ive gone to put it in thats all well and good bolted up etc now ive gone to hook up the clutch cable and the fork is just moving freely and not making contact with the pressure plate
I’ve measured the pivot point distance on the fork and that’s correct, the release bearing is the same as what it previously had any ideas on what it could be?