dat111
Member
- Joined
- Apr 9, 2011
- Messages
- 103
- Reaction score
- 2
- Points
- 18
- Age
- 33
- Location
- umina beach,nsw
- Members Ride
- VS commodore
hey everybody.
currently looking at doing a transmission service on a VZ 4l60E
any tips an tricks on doing the service? an best place to cut the transmission lines? ( i couldnt find the required barbs to fit onto the transmission lines so i thought cutting them is next best option)
i have a ryco rtk4 for the deep pan7
litres of valvoline max life
transmisison cooler+ 3/8th hose
pipe cutter
after watching a few youtube videos i saw that most if all dont replace the filter neck seal.
im hoping i dont have to, after consulting the factory manual it says to use circlip pliers to pull it out i havent bee able to find a place to hook on to if i was doing to (i presume they are jammed in there pretty tightly?
currently looking at doing a transmission service on a VZ 4l60E
any tips an tricks on doing the service? an best place to cut the transmission lines? ( i couldnt find the required barbs to fit onto the transmission lines so i thought cutting them is next best option)
i have a ryco rtk4 for the deep pan7
litres of valvoline max life
transmisison cooler+ 3/8th hose
pipe cutter
after watching a few youtube videos i saw that most if all dont replace the filter neck seal.
im hoping i dont have to, after consulting the factory manual it says to use circlip pliers to pull it out i havent bee able to find a place to hook on to if i was doing to (i presume they are jammed in there pretty tightly?