VL dash loom plug pinouts, for your gauges, saves pulling the dash out [PIC]

[vl5l]

after looking around trying to find the pinouts of the black plug near the fan motor i traced it myself, saves you time pulling the dash and doing it your self.


and the pic of the black plug is


this should help all your engine transplants and also the pesky VSS issues.

 

[Moosey90]

after looking around trying to find the pinouts of the black plug near the fan motor i traced it myself, saves you time pulling the dash and doing it your self.


and the pic of the black plug is


this should help all your engine transplants and also the pesky VSS issues.

Hey mate do you know how to remove a pin from dash plug? I want to move pin 14 to pin 2

 

[krusing]

There are special plug terminal tools to do that,

Check out/search on eBay.

 

[WilsonVL]

after looking around trying to find the pinouts of the black plug near the fan motor i traced it myself, saves you time pulling the dash and doing it your self.


and the pic of the black plug is


this should help all your engine transplants and also the pesky VSS issues.

This is awesome mate!!
I’m a bit new to this, I’ve put Rb20det into my VL and want to clarify. Is it as simple as hooking my ecu tacho wire to the tacho signal brown wire? And then ecu engine temp wire to green water temp sensor wire?
Cheers