ajvx01
Member
- Joined
- Dec 13, 2010
- Messages
- 911
- Reaction score
- 6
- Points
- 18
- Location
- North east Adelaide
- Members Ride
- 308 vc
Just a quick thread to show my rig.. Or actually just do I can ask questions in here and ask for parts rather than try to deal with the pain that is the wtb section on here!
Car is a 1981 vc sl 308 with trimatic, drives great, starts well and is great for cruising!
When I bought car:
Progress:
Mods are
Super low springs
All new bushes everywhere
304 accessory swap
Refurbed interior
Twin 2.25 into 2.5 exhaust
Holley 650
Hdt air tray
Manual steering swap- in shed still to do
Filter through bonnet- in shed still to do
Replaced all globes inc console to led but dash- ( dash to do still)
Custom parcel shelf with basic stereo
Removed gas kit
Line locker- in shed still to do
Lots of other little touches, any questions just ask
Power is 125rwkw after custom tune
CURRENTLY CHASING A SET OF ULTRA LOWS PLEASE
^please pm me!
Any input or ideas by all means throw em my way.
Next up after the ultra lows I plan to widen the interceptors to 8.5" wide with big dish and fo some panel smoothing etc.
Long term is t700 with either a tuf 11:1 308 or a pd blown 304.
Question: other than whipple and yt what valley blowers are there for the 304s?
Cheers,
Aaron.
Car is a 1981 vc sl 308 with trimatic, drives great, starts well and is great for cruising!
When I bought car:
Progress:
Mods are
Super low springs
All new bushes everywhere
304 accessory swap
Refurbed interior
Twin 2.25 into 2.5 exhaust
Holley 650
Hdt air tray
Manual steering swap- in shed still to do
Filter through bonnet- in shed still to do
Replaced all globes inc console to led but dash- ( dash to do still)
Custom parcel shelf with basic stereo
Removed gas kit
Line locker- in shed still to do
Lots of other little touches, any questions just ask
Power is 125rwkw after custom tune
CURRENTLY CHASING A SET OF ULTRA LOWS PLEASE
^please pm me!
Any input or ideas by all means throw em my way.
Next up after the ultra lows I plan to widen the interceptors to 8.5" wide with big dish and fo some panel smoothing etc.
Long term is t700 with either a tuf 11:1 308 or a pd blown 304.
Question: other than whipple and yt what valley blowers are there for the 304s?
Cheers,
Aaron.