nonricer
Member
- Joined
- Jan 24, 2013
- Messages
- 87
- Reaction score
- 0
- Points
- 6
- Location
- north western sydney
- Members Ride
- want to get a VE SERIES 2 SV6
The pistons are Wiseco forged racing pistons, 8.2:1 compression.
Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.
BOOST UPGRADE KIT
Supercharger boost upgrade kit which comprises of a special modular hub, 10psi pulley (other pulleys from 9 to 21psi are also available), new belt, loan of our factory pulley removal tool and installation instructions.
COLD AIR INTAKE INSULATOR FOR HOLDEN SUPERCHARGED 6 L67
Exclusive to MACE Engineering, our design-registered manifold insulator kit to suit Holden supercharged 6 L67 engines. Available in 1/4 inch (6mm) and 1 inch (25mm). This modification has been specifically designed to reduce your supercharger outlet air temperature, without the trouble of going to an intercooler, by insulating the hot engine heat from soaking into the supercharger. It can also be used in intercooled vehicles as well to improve their cooling efficiency
INTERCOOLER KITS
Exclusive to our blizzard range of water to air intercoolers, is the composite thermal resistant housing meaning that our coolers do a much better job of cooling the air from the supercharger, compared to their aluminium counterparts. Not only does this improve outright power, but also significantly reduces heat soak issues over conventional aluminium housings. The composite material has a thermal conductivity of 0.29 W/m*K as opposed to 150 W/m*K for aluminium. Therefore, our composite material conducts heat 500 times less than Aluminium!
To see the difference between aluminium and our thermal composite material, check out our intercooler test video clip below.
*MINIBLIZZARD - 24mm thick composite housing.
*LARGE/MEGABLIZZARD - 50mm thick (large blizzard) & 58mm thick (mega blizzard) composite housing.
HIGH RATIO ROLLER ROCKERS
High ratio (1.9:1) & ultra high ratio (1.98:1) roller rockers (stock ratio is 1.65:1) to suit EcoTec V6’s in both naturally aspirated and supercharged form (L36 and L67 engines). A very cost effective way to bump up the performance of your late model Commodore, by increasing valve lift thereby allowing your engine to breathe much more efficiently.
CNC PRECISION PORTED THROTTLE BODY
Cnc precision ported throttle body is enlarged to a final diameter of 69mm increasing maximum airflow by 14%. Backed up by testing, gains of around 10 HP at the rear wheels are to be had if used in conjunction with extractors/exhaust and cold air intake. A greater power gain can be achieved if more mods have been undertaken such as a larger cam, supercharger etc…
MASS AIRFLOW METERS
Installing a large MAF is a very cost effective way to bump up the performance of your late model commodore by significantly increasing air flow through the intake. Available in both 74mm and 85mm.
COLD AIR INTAKE ENCLOSURENew generation cold air intake/boxes to suit Commodores VB-VZ and Statesmans from VN-VZ, which are a direct bolt on drop-in replacement for your existing air box assembly. The kits include an all new air box, airflow meter safe pod filter, along with mounting hardware required for complete installation.
Hi nonricer,Hello again guys, I am wondering how much power would be made with the following combination of parts.
A2A intercooler kit
1.98:1 ultra high ratio roller rockers
Stage 2 Comp cams
cold air intake
powerbond 5% overdrive race performance balancer.
cold air intake 25mm insulator
crow cams hydraulic roller lifters
crow cams 130lb valve springs
bored out 69mm throttle body
rollmaster double row timing chain
arp con rod bolts
19psi pulley
arp headstuds
inlet manifold gaskets
arp main studs
manley performance valve spring retainers
upgraded supercharger coupler
comp valve locks
premium Viton valve stem seals
82 degree thermostat
CNC ported heads
reverse single throttle plenum
25mm plenum/manifold spacer
CNC ported inlet manifold
CNC ported supercharger
light weight rotor pack
4.2 stage 3 stroker kit
Bypass valves
rebuilt supercharger
yella terra race snout kit
laser heat shield
power max premium spark leads
Custom tune
And which exhaust system would go with this setup,
De fillipo dual 3 inch system which includes headers with 1 7/8" primaries, dual 3" exhaust system with high flow cats, or
De fillipo dual 2.5 inch system with 1 3/4" headers and dual 2.5" exhaust system with high flow cats.
Thankyou.
Also is there anything else available to make more power, yet still keep it a daily driver.
I do apologies for the delay in getting back to you nonricer. Detailed questions like your do take to answer properly. Hope this helps.Come on please guys I have waited for a week
If you're looking at V6performance you're setting yourself up for failure. Heaps of people have had very bad experiences with V6performance, myself included many many years ago. MACE offers anything they do and won't rip you off like others may.
If properly done, depending on how hard the blower was spun, you would be looking at gains of around 10-15rwkw.Thanks, how much more power would there be with the ported supercharger and LS throttle body?
Glad we could be of assistance Ian Very grateful of your continual support.I concur with this , Mace are great to deal with , I've been getting bits and bobs from them for a couple of years , and advice and tips are but an email or phone call away .