robkeith
New Member
- Joined
- Aug 16, 2011
- Messages
- 20
- Reaction score
- 0
- Points
- 1
- Location
- south australia
- Members Ride
- Hilux LN110R with Vx ecotec using VP11 electrics
Hi,
have finally decided to replace my 808 loom on my ecotec with an ecotec loom. My current wiring is in 2 parts, 1/ lwr engine loom and relays which controls starter alternator fuel pump etc. 2/ engine top loom which plugs into the sensors and ecu unit and injectors. Is any of this compatible if i go to VT loom? Im hoping that the lower loom (1) can still be utilised?? Do i need a BCM simulater or can i just get the memcal reburnt and VATS removed?? i want to use a 4L60 trans NOT the 'E' version
have finally decided to replace my 808 loom on my ecotec with an ecotec loom. My current wiring is in 2 parts, 1/ lwr engine loom and relays which controls starter alternator fuel pump etc. 2/ engine top loom which plugs into the sensors and ecu unit and injectors. Is any of this compatible if i go to VT loom? Im hoping that the lower loom (1) can still be utilised?? Do i need a BCM simulater or can i just get the memcal reburnt and VATS removed?? i want to use a 4L60 trans NOT the 'E' version