Wraven
New Member
I recently bought a set of CTSV front calipers for my VE commodore ute. Right away, I realised that my HSVi Veloce rims would not fit the brakes (pictured below)
So naturally I went ahead and did my research into what rims will fit these calipers.
My other issue was that I was interested in rims that fit that were also 18”.
R35 GTR, Jeep SRT8, Range Rover Sport, and from memory some Camaros and Corvettes all use the same exact calliper.
From what I have found, these following rims will all fit with these brembo 6 callipers in 18 diameter (this is irrespective of stud pattern, purely calliper clearance, individual application will vary):
- Koya SF13
- Koya SF15
- Volk TE37
- Volk ZE40
- Volk Gramlites
- Advan GT
- Advan TCIII
- LM4 (GTR rims)
- LM GT4
- CCW Corsair c10
- SSR (unsure what model, but they would be forged)
- TRD pro race 1.2
- Forgeline GA3r/GA1r
- HRE p40
- Enkei PF01
- Enkei RS05-RR
- Enkei GTC01
- Some Finspeed rims
- Some Konig rims
- BBS SR rims
- OEM C6 zo6 rims (with a spacer)
- OEM 513M rims
As for 19-20”, any rim that is 8.5+45 which marks “BBK clearance” will work, and anything wider than 9” should also fit.
For factory Holden rims:
No standard commodore rims fit.
Supersports will not fit
All VE/VF HSV rims will fit
VF SSV redline (s1 + s2) rims will fit
HSV SV Rims will fit
American spec Chevy SS rims will fit
I traded my HSVi Veloce rims for SSV redline rims, which clear. These rims are 19x8.5+48 on the front and are 19x9+57 on the rear
Tight calliper to face fitment
In the future I plan on buying Koya SF13s as I think these are the best looking 18” rims on a large bodied commodore and are extremely good value
So naturally I went ahead and did my research into what rims will fit these calipers.
My other issue was that I was interested in rims that fit that were also 18”.
R35 GTR, Jeep SRT8, Range Rover Sport, and from memory some Camaros and Corvettes all use the same exact calliper.
From what I have found, these following rims will all fit with these brembo 6 callipers in 18 diameter (this is irrespective of stud pattern, purely calliper clearance, individual application will vary):
- Koya SF13
- Koya SF15
- Volk TE37
- Volk ZE40
- Volk Gramlites
- Advan GT
- Advan TCIII
- LM4 (GTR rims)
- LM GT4
- CCW Corsair c10
- SSR (unsure what model, but they would be forged)
- TRD pro race 1.2
- Forgeline GA3r/GA1r
- HRE p40
- Enkei PF01
- Enkei RS05-RR
- Enkei GTC01
- Some Finspeed rims
- Some Konig rims
- BBS SR rims
- OEM C6 zo6 rims (with a spacer)
- OEM 513M rims
As for 19-20”, any rim that is 8.5+45 which marks “BBK clearance” will work, and anything wider than 9” should also fit.
For factory Holden rims:
No standard commodore rims fit.
Supersports will not fit
All VE/VF HSV rims will fit
VF SSV redline (s1 + s2) rims will fit
HSV SV Rims will fit
American spec Chevy SS rims will fit
I traded my HSVi Veloce rims for SSV redline rims, which clear. These rims are 19x8.5+48 on the front and are 19x9+57 on the rear
Tight calliper to face fitment
In the future I plan on buying Koya SF13s as I think these are the best looking 18” rims on a large bodied commodore and are extremely good value
Last edited: