Search results

This has come up a few times, but it takes a few threads to get to the bottom of things some times. Urethane bushes and strut tops. There are 3 or 4 brands. Are they all the same or different. They claim all kinds of things but I think most of it is marketing. So in short, do you think there...

The time has come to part with my very trusty VE. 300 plus ks on the clock and mostly solid but of course showing it's age in some ways. Trans seen better days. Is there a market for these old warriors? What should it go for?

How much of an issue is this? Recently bought an evoke with about 120,000 km on it and curious if the valves are likely to be full of carbon and need a clean. If it needs cleaning what is the best way to fix it? Do I need to lift the intake and spray intake cleaner straight on the valves...

Looking at replacing my worn out VE. How would you rate a VF wagon? Are some years better than others? Is a 3 litre wagon better on fuel than a 3.6 VE sedan? Seems odd the rear middle seat doesn't have a headrest. The middle passenger could get quite a headache in an accident. Opinions welcome.

I'm still committed to the commodore for now but it's getting older and the ks are getting up there so there's no knowing how long it will last. The next car could be a late model VE VF if it's not crazy expensive or something else. So in the something else category are things like a...

The last 15years have taken their toll and the tailshaft needs doing. Center bearing and rubber donuts have flogged out. What's the best way to go? Pull it out on stands and rebuild it? Buy a reco unit, or give it to mechanic with a hoist? Exhaust has to come out too. If you have done yours...

Interested to know the answer if anybody knows. The lower control arms appear to be the same on both sides. The same part number is stamped on both. The only different I can see is the bush is direction of the bush is inserted the opposite direction, with the larger flange towards the front. I...

So it seems most people just but the butter and swap the whole pump assembly over. That send to cost around 300 bucks which is a fair chunk of change. My pump is original as far as I know and it's done nearly 300,00km. Still going ok but I suspect the little filter will be full of shite by now...

The 15 year old tint factory tint has seen much better days. It's getting cloudy and peeling off around the edges. The rear windscreen is by far the worst area. It is starting to obstruct my view through the mirror. What is the best solution? I would like to peel it off without damaging the rear...

The VE is slowly heading for 300,000ks and over 10 years old so I have a feeling some of the bushes are flogged out. Wheel alignment is a bit suspect as well which I think is related to the shagged bushes. Would they all need doing or just certain ones? I don't want to go full Superpro or...

I haven't used Dunlop for about 20 years. Anyone got a more up to date opinion on these SP Sport FM800 for a V6 VE? They are on a buy 3 get the 4th free sale. I want something with good grip and lasts a good few years... Thanks

I Replaced the engine mounts last week after a long hard life of over 270000 ks. Probably should have done them a few years ago but better late than never. Does anyone know the torque specs for the K frame to chassis bolts? It sounds like there is some movement going around corners or over...

Just putting it out there, if you wanted a decent socket set for a bargain... https://www.repco.com.au/

I was washing my car today and noticed a fair bit of dirt around the tail lights in the recess under the boot lid. So I tried to pull one of the taillights out by removing the 3 10mm nuts holding them in but the light won't come for free and I don't want to break it. Are they glued in place or...

So tradies, if you were considering a career change from a desk job to a trade at the age of 40 which trade would you choose? Mainly due to my age I think plumbing is out due to the amount of digging involved?

I've always used the good old Stanley box set with the green and yellow handles and a few other odd screwdrivers for working on cars and whatever else I do. They all look good to start with but soon enough the tips start to round off and become useless on anything super tight and start munching...

This is the engine mount on my Alloytec. I guess those brown stains are not meant to be there? If I need new ones, where's the best place to buy?

SuperCheep has a few Stanley sets on sale at the moment. I'm thinking of getting one for my brother for Christmas. He's not a big user of tools but does some stuff around the house plus has kids with bikes etc. There's a 40 piece chrome 1/2" set in the metal box or a 78 piece set, black finish...

Got a set of genuine rear rotors and some pads ready to go on when it's not raining. If I release the handbrake will the rotor pull off or do you need to adjust handbrake back as well? I guess after the new rotors are on the handbrake will need some adjustment anyway but is there usually enough...

Spotted on the Supercheap site some Monroe shocks going cheap... just going to leave it here! http://www.supercheapauto.com.au/Product/Monroe-Shock-Absorber-GT-Gas-25-3632-Pair/305707?menuFrom=5041613

The standard remotes that come with most smart TVs are pretty average. Try to type something into Google and you'll be there for 5 minutes. What are the best ones to get ?

I got a V8 drive at Eastern creek for a surprise birthday present and wondering if anyone's done it before? Is it full stick or is it what I've heard you are only allowed to use first second third gears which would be a bit lame I reckon???

Had the engine light come on recently and stay on. Car still drives normal. Got it scanned and there were a few oxygen sensor codes logged. Not sure exactly what the codes were. Cleared the codes. Few days later engine light came back on no doubt for the same reason. I've heard a lot of people...

How long after replacing brake pads before you can safely tow a heavy trailer ? Is next day OK with about 50ks driving to bed in??

Hi the last few days I keep getting dodgy popups whenever I try to open a thread. Its saying ive got like 2 minutes to answer some stupid questions to win an iphone..... am I the only lucky one seeing this? Cant close it or go back to JC, have to close the window and start again.

There's been a slight tick from the drive belt for a while and very slowly getting worse. Sometimes the tensioner shakes and i can feel the water pump pulley wobble a bit so I'm going to change it out. The tensioner is already new. There are lots of pumps for sale online from $25 up to...

07 VE V6 with 4 speed auto is getting close to 250ks. Runs very well, regular oil and filter changes done on engine and trans. Has new radiator, shocks, strut tops, diff oil, Needs brake pads and rotors and has the ticking from top of engine so probably needs the purge solenoid thing as they...

When my radiator failed the temp needle went up to about 3/4 and an engine overheat warning chimed up on the dash. Now I've replaced the radiator and it's running ok but the needle is still stuck at 3/4. Would that mean my gauge or sensor is buggered or would it have logged an overheat code...

Couldn't see many threads on VE radiators so.. Mine has blown the top hose neck so I need a new one quickly. Hopefully it hasn't blown a head gasket as well because it blew out while I was driving and not sure when. What brands are worth getting? There are plenty on ebay but I don't want to...

Fairly recently this noise has started everytime i lean back into the seat then lean forward agian. It's like a click - clack noise. It's a series 1 Berlina with a over 200k's on it. The noise seems to be connected with the lumbar support. If i wind up the lumbar support to the max it goes...

The good old Dell notebook is on the way out after about 8 Years reliable service aside from 1 crash we don't need to mention.. Want a new reliable machine with a decent size screen, 15 inch minimum that will do everything people need to do at home. The usual ports plus whatever else is...

If you walk in to the local Repco, Supercheap, Battery world or wherever and pick up a battery how charged would it be ? I guess they are fully charged from factory but how long will it hold it's charge for? I bought a repco battery for my brothers car and oil and filter to do a minor...

The shelves used to be packed with Nulon but suddenly not so much, any idea what happened ? Probably just a contract thing, looks like they have picked up more Penrite and their own Cheif and STP stuff now... Shame cos i like the Nulon Synthetic ATF :(

You may find it hard to believe but we still have an old school 68cm TV. Some time soon i want to upgrade to to a reasonably high end LCD around 50 - 55 inch. What are your tips? Are there any that stand out about the others. Is it worth getting 100Hz ? Don't watch much sport, but hate the...

Hey are there any flooring people on here? I need to do a big job with Self levelling cement but have never used it before:hmmm: Got 300 n something kg's to spread through the longeroom floor. How easy is it to use ? What's a good size bucket to use to get it done the fastest ? What's the...

My A/C has lost all it's gas thanks to a hole in the condenser. There's a greasy mess at the bottom of the condenser so it needs replacing :( Where is the best place to buy one ? ... Is Genuine or aftermarket better or are they same ? Just my luck Summer has come early !:banstick:

Has anyone used one of these trolley jackhammers ? I need to find something to break up a few rooms of floortiles without smashing through the floor boards:hmmm:

A few months ago i finally joined the 21st century when my wife bought me my first smartphone ! It's just a baby Samsung so don't get too excited. So finally the bluetooth system in the Berlina can be put to use. I can receive calls no problem and communication is loud and clear so the basics...

So there are hundreds of TV's out there all claiming to be marvelous but what are the important features to get ? Something in the 40-50 inch LED LCD range that is WiFi capable would be ideal. Mostly for watching normal TV and net with a nice smooth picture. I reckon my old 68cm Sony has a...

We have ants all over the place around our house not to mention signs of wood borer and a bunch of other pests. I see plenty of adds for various companies but i'm guessing half of them are useless. Are there any companies you would recommend or have had good or bad experiences with?