Recent content by Phillbert

Just to finalize this thread, solved the problem............... sold the ute! :p

hi m8, @stick3 post a site in my thread on the same issue... get the hose from link below at 1mtr lengths, as said auto shops only keep 300mm hose now. https://www.proflow.com.au/custom-car-shop/hose-tubing/submersible-fuel-hose/

Hope this doesn't sound silly but when you did the new DFI Module did you add the Thermal Paste to the plate? Reason i ask i had same issue with my l67... when doing the LIM gasket i cleaned off the paste (thinking it was dirty grease) and had the same problem you have until i put some new paste...

I got him on FB Messenger if need the contact.

I rang a few wreckers and couldn't get a good one, last place i tried had a perfect one there. A guy i was speaking to has done a 3d version on Facebook, not sure on cost though.

Picked up the Rear Center Seat to complete the Rear Seat section. I spent a bit of time getting the center arm rest to work, Seems like it was never used and stuck so the old wd40 soaking before it went to the trimmers. works like new now :)

need to get it scanned to find error and also to clear it

Had similar issue not long back, no red flashy light on dash, not starting... locksmith came out and did the key head (FOB) got it running in no time 2000 VS Ute

Congrats m8, must be a bit of a head rush winning at a show

narr it's there just a bitch to get to, got the old clamp off, trying to get hose near atm but camera went flat. made a good tool with heavy coat hanger wire, now using it to get hose back on.

Think i will go Macgyver style with a coat hanger tomorrow see if i can pull the clamp off as it is all perished in that area, hope it will just come off and try to slip the new one on.

bit extreme but def the way to go if i had the tools at my disposal and your qualifications

What a headache, yeah found the connection lol, 2/3rds around the back of swirl pot. Got no idea how one would get a hose on or the clamp off it but will try tomorrow.

nope i dont have that pipe to connect to. spent 1 hr looking with camera and nothing there to connect to there is a blank cut out spot that looks like where it might be but has metal cover, no hose/hole/connection

nope turns out it was just a clamp sitting on bottom of tank. still cant find where to connect hose to swirl pot?