delcowizzid

Hey mate,
just wondering if you still modify Memcals?
got a VR memcal need the vats removed. Put Vr engine transmission loom and ecu in Vp. But won’t start unless it has the go memcal in. But that wont drive properly. So need the vr memcal with no vats.

Hey bud ,

We have put a vt 304 v8 into a d21 Datsun ute .

It runs and drives -The Scan tool powers up But I cant read the codes

No BCM . VATS removed from PCM.

Diagnostic plug as follows

Diagnostic Pins 4 and 5 Earth, Black
Diagnostic enable : Pin 6 to F14 in PCM, White / Black
Serial data wire : Pin 9 to A3 in PCM, Red / Black
Batt positive 12v : Pin 16 .

Cheers

Hi mate, I have a wh statesman I’m helpong a mate with. It’s got a problem draining the battery and he’s been told that it’s the computer. I’m gonna do some basics currant draw tests but is there anything you can recommend? And if it does turn out to be a computer would it be fixable? Also interested in tuning options as eventually it’s getting heads and cam. Thanks,Jake

Hi mr Delco wizzid can I please get you to do a memcal for me for v6 Buick 4l60 auto cam tech cam 9.5 comp o2 sensor street driven. I don’t have access to a dyno or tuner in my area,Ron from sic six has passed on your info to me. Can you email or call please 0419851433 [email protected] thanks Tim

Hi there. I am going to a vy v6 commodore in speedway (streetstocks). Standard engine with maybe a towing cam. I don't want o2 sensors, need the vats removed, and need power coming out of the corners rather than at the end of the straight. Can we talk memcal upgrade? Cheers

Hey mate, just wondering if you would be able to help out with a memcal, need it to suit a turb vt v6 with a gt3582 and l67 injectors?

Hey mate, if you have time can you please check my thread about the 02 you was helping me with. I have posted up the multimeter results. Need to work out the next step and go from there.

Regards Anthony

Hi Delcowizzid,
You have been commenting on my vr remap post. Ide like to talk further with you about this and organise sending you the chip for tuning.
Cheers!!

Hi there mate...Graham is my name...would be great to have a chat..021998530

Hi delco wizard , I'm after some help with a delco tune . I have a chip that came with the cam but I need to turn the knock sensor and oxygen sensor off as it's going into a speedway car. It's a Vn v6 . Can you inbox me please. Cheers