Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.
Can flash a new tune into VX and VY PCMs for free .. delcohacking.net • View topic - The FlashTool V1.31
Can also read any tune thats been done, if its locked that tool can also unlock the PCM for you :boxing:
Check a few lines below that bit and it has a link to a post about setting it up for flash based VX, VU and VY vehicles. Dont need any chips or mods done to the PCM to be able to adjust the tune.
If your VX is a S/C V6 then I am not sure what chiptorque add, the standard memcal can be reprogrammed (using a UV eraser and EPROM programmer), have seen some companies use a small board in place of the EPROM or memcal to stop people from reading the binary. Its very very unlikely that its going to be an NVRAM and be compatible with the flashtool.
Go to mace Enginnering web site or ring them they do Ecu's for vy commodores $250..00 I recently done my vy v6 i put a stage Two Cam Kit, 12mm Plenum Spacer, 69mm Throttle Body, 2100 To 2200 Hi Stall converter, Cold air box. They done a ECU for me upped the line pressure in the transmission hangs on to the gears longer and changes smoother. lot more pick up from start differently more power go to there web site and look up vy v6 Ecu's. There is a tune Sheet to fill out with all your mods every thing down to your exhaust size you must be very clear on all your mods.ahh okay cool as mate, thanks for the reply ...
So basically ya cant really tune a VY easily im guessing .. awww .. thanks for the linky anyways dude!!!!