Just started up my fresh build S1 VN motor, primed up for about 1 min no plugs before starting and seems OK.
I have an oil light if i use the new oil sensor i bought but using the old sensor the light goes out straight away so maybe they sold me a ecotec sensor?
Checked for oil with sensor out...
Hey guys, I just got a new CAS from holdspares apparently GOSS brand, in the box was the new alloy bracket...
And 2 sensors, one says "S10" and was already in the bracket loose, the other is floating around in the box and says "W10"
EDIT: there is no difference in appearance between the two...
Hey guys, I'm just finishing up the engine setup and theres a (clearly engineered) hole in the passenger side of the block near the starter motor.
I can't remember if there was anything there but it is just OPEN to the crankshaft so all sorts of **** can go in... there is no thread inside it or...
Hey guys,
Just ”upgraded” from a Series 1 omega to a series 1 SV6 and I have a question about the operating coolant temperature.
I was driving the SV6 today and I noticed the radiator fans have been coming on a bit recently.
Did some investigating and the coolant was brown and sludgy, which I...
my car idle little rough when stop at lights, Recently changed all six spark plugs, throttle body and mad sensor cleaned, no engine light, checked everything but found nothing. Battery was flat recently changed, Rpm at 550 when idle and stable but running little rough when idle but runs...
Hey guys new to this page and thought I'd ask a couple questions, I've got a series 1 vn v6 and I'm having trouble with the thermo fan, I've run the car to get to half temp and water just boils and comes out the overflow, thermo fans don't turn on and neither do the ac or blower fans, I've...
Hi Folks just checking over a 2nd hand 3.8L V6 series 1 engine before I put in the car. I checked all the tolerances on the balance shaft with a dial indicator and all really good. But when I hand crank the motor over it doesn't half make a knocky noise. Whats involved with removing this and not...
I’m just wondering how to tell what series VX Berlina I have, as I can’t find a definitive answer online. I want to upgrade the exhaust to a Catback with hotdogs and from what I can find online the series 1 only has one cat near the floor pan and the series 2 has two cats.? All the Catback pipes...
Hey guys,
So I've recently picked up a 08 VE Commodore with 130ks on the clock for a fairly good price.
I downgraded from my VF2 Wagon so we could get one of the new Acadias which are on run out!
I miss the Tech and Dual Zone Climate Control from my VF so have been exploring options to add...
Hey guys I was wondering, if you can get Aftermarket satnav on a VF 2013 (series 1). It's sv6 so doesn't come with it standard. What's the easiest way to get it on my car?
Cheers
Hey guys, first time poster here!
Just wondering if you guys could give me some advice...
I'm looking at upgrading to a VE SS ute...
But I'm debating whether I should go for series 1 as with engine work already done (320-350kw @wheels) or a near stock series 2 SS with maybe an exhaust and otr...
Just a quick question and I apologise if this is in the wrong area...
I have a 97 Toyota Hiace with a Series 1 3.8 V6 with a 4 sod auto behind it. Runs into an AU diff (shhhh...it’s a F***)
I keep blowing up the trans and not because of burnouts or towing heavy loads. They seem to deteriorate...
Just wondering if series 1 and 2 exhausts are the same as i replaced my series 2 exhaust with a series 1 today and realised the resonators are a little different. Later on the engine light came on im guessing maybe because the exhaust was maybe sitting for a little and the o2 sensors have been...
Hi guys,
I am looking at upgrading my VU ute to a VE SV6 sedan, not looking for an SS.
I can't pick between the series 1 (MY9.5 SIDI at a minimum) or the series 2 with a manual. From the exterior, the series 2 does look that little bit nicer and it's leaps and bounds ahead on the...
DESCRIPTION: Want to Buy
ITEM: OTR CAI for my Series 1 V6 VE Commodore
PRICE: $300 ono
LOCATION: Mount Waverley, VIC 3149
CONDITION: Used
DELIVERY/PICK UP INFORMATION: Can pay postage or pick up (pick up preferred)
PAYMENT OPTIONS: Cash, bank transfer, or PayPal
CONTACT...
DESCRIPTION: Want to Buy
ITEM: OTR CAI for my Series 1 V6 VE Commodore
LOCATION: Mount Waverley, VIC 3149
CONDITION: Used
DELIVERY/PICK UP INFORMATION: Can pay postage or pick up (pick up preferred)
PAYMENT OPTIONS: Cash, bank transfer, or PayPal
CONTACT DETAILS: text me on...
Hi all and apologies if this has already been posted,
i recently removed a motor form a series 1, 97 VT commodore and put it into a series 2, 99 VT commodore, and upon trying to start it i get no click at my starter relay. i know that the wiring looms are different from a series 1 to a series...
Gday! this is my first post, i come to this forums alot for help over the years.
my question is, the top of the engine where the injectors and throttle body connect to (the part with the 3800 written on it), is that changeable between the S1 and S2? say S2 block with S1 head (i have had a...
Apologies in advance- im an owner that has never before owned a car with more then 4 cylinders (yes im a girl)
ok guys quick question - 2 days ago i stalled the atomic beast, it was in reverse and hand brake was on. Problem that i posed - the engine light came on almost immeditaly - it...
Hey guys,
I've run into a bit of trouble with project aero, while putting the series 2 motor into the series 1 shell, I decided to keep the series 1 radiator and heater tap? the whole system pretty much.
I'm just running into a lot a problems with connecting ****, and the books I have don't...
Hi guys,
I have a series 1 VE Lumina '07 (No pics, joined today) and want to put a series 2 Calais bodykit on it. Front bumper, rear bumper, side skirts, tail lights and headlights. I have asked someone about this outside of JC and I was told I would need to change the bonnet aswell because...
I have a great VN S1 6 motor in a crap car, and can get a great S2 6 car with a dud motor.
The gearbox on the S1 is crap.
Will the S1 motor go straight in to the S2 car??
If so, this will save me a lot of money and trouble.
Thanks guys!
Hey guys. Just wondering with out buying matching/different extractors would this fit no problems? I don't have heaps to spend at this point in time. Eventually Id like to get extractors as well + new shockies/springs from my last post.
Shouldn't be any dramas should it? just unbolt the...
Hey Guys,
I am just wondering what diff is in my Series 1, VT S pack. I am interested in changing it and am just wondering whether:
1) it is worth changing the diff gears
2) whether or not my diff is the IRS or the LSD as well. Is there any way I can tell?
Thanks.
hey
I put a vp series 2 engine in my vn series 1 car and 2 cables did not line up... the cable on the loom and the one under the passenger side of car where ecu is. and one just under the fuse boxes.
Does any one know what these cables are and what i can do to fix this problem.
thanks heaps
ITEM: HSV VY Series 1, 3 window cluster
LOCATION: ACT
CONDITION: Brand new, never fitted to car
PRICE: $500 or nearest offer
DELIVERY/PICK UP INFORMATION: Pick up is available from Theodore, ACT, but will post at buyers expense.
PAYMENT OPTIONS: Cash, funds transfer
CONTACT...
Hey was just wondering if anyone knew where to adjust the idle on the vp series 1 w/3.8. Is it up where the throttle cable is on the top? It seems lose like there is no tension but still works when ur using the foot. Apparently it has overheated before and i'm looking for that problem also...
Hey guys,
Having an 01 exec, i hate seeing all the little scratches over my car. Dont really want to fork out all the money for a respray :cry: Is there anything that anyone can recommend for a quick fix of this problem.
Really want to stay away from a respray, but if it comes to it, how...
hey, i have a series 1 vn v6 motor, i know, they suck, but it was there when i bought it, i'm trying to replace the rear main seal, but i'm having trouble locating one, holden say they're obsolete, so i tried repco, i got a 2 piece rubber one which didn't fit, then they gave me one for a vp with...