Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Search results

  1. ewebz91

    My Omega Sportwagon

    Bit of an update, not a lot of progress as i haven't really had the motivation or the time, but now i am starting a new job i will have a lot more time on my hands and even just looking at the state of this car is giving me my motivation back haha, it has been a bit neglected. What i have...
  2. ewebz91

    Ground noise through speakers after new amp install

    I thought it had something like that jumper thing!!!! Got around to looking at it today, changed that to grounded instead of isolated, changed the wiring around and did a bit of tidying and rerouting of certain cables (it was a bit of a mess). Tested it out and there is no more noise!!! Not...
  3. ewebz91

    Ground noise through speakers after new amp install

    Yeah i already went over a fair bit of the cabling to try and figure it out. All the speaker wiring is run from the back of the headunit down the drivers side of the car 1) Using 16awg from the back of the headunit to the LC6i then from amp to speakers, Subs are running 10awg. Both have a...
  4. ewebz91

    Ground noise through speakers after new amp install

    The weird thing about it is that the feedback seems to be coming through the RCAs. When they are disconnected from the monoblock it seems fine. So it seems to be going through the RCAs into the LC6i then through to my 4 channel. I will be installing a head unit eventually and once thats done...
  5. ewebz91

    Ground noise through speakers after new amp install

    The guy who had originally installed the setup had the LC6i connected to the power and ground of the 4 channel amp which was about 10cm. It is now run with power from the battery and grounded to a bolt near the battery, cabling would be more than 40cm. Probably about 60 - 70cm but not too sure...
  6. ewebz91

    Ground noise through speakers after new amp install

    My System: Speakers: Phoenix Gold Ti2 Components Pioneer Coaxial Rear doors (no sure what model, something relatively cheap) Subs: 2 x Phoenix Gold Ti3 10" 2000wrms Amps: 4 Channel - Pioneer GM-A6604 - 4awg power wiring Monoblock - Clarion DPX11500 - 00awg power wiring LOC -...
  7. ewebz91

    My VE Omega

    I'm not sure I like the new lights, might be better in person but going off the photos id rather have the tinted SS wagon taillights, especially on a white car.
  8. ewebz91

    High pitch whine through speakers (not alternator noise)

    Hey guys, I got my sound system setup in my wagon and found that it is getting an annoying high pitch whine through the speakers. The whine gets louder as the music does and it does it while the engine is on and off! Anyone got any idea what it could be? Any help would be great. System...
  9. ewebz91

    My Omega Sportwagon

    Did a bit of work in the wagon this weekend: The silver trim was all scratched and filthy so I bought some cheap wrap and covered it Also installed the fan for the amp
  10. ewebz91

    My Omega Sportwagon

    Yeah true, they definitely had to go! Supersports look 100x better on it
  11. ewebz91

    My Omega Sportwagon

    Since installing the sound system in the spare wheel compartment, the amp has had heating issues. I have a few old computer fans lying around that I'm going to put in over the weekend, maybe create a bezel to direct air flow. Also received the fog light loom today, will look at installing these...
  12. ewebz91

    My Omega Sportwagon

    Hey guys, thought I would post up my wagon Year : 2009 Make : Holden Model : Omega Body : Wagon Price : 12500 KMS : 155000 Transmission : Auto When I bought it: Lowered Suspension (not sure what springs) 19" Irmscher wheels Clubsport quad tip exhaust Tinted Windows Rear...
  13. ewebz91

    2009 Holden Ve omega

    ewebz91 submitted a new Showcase Item: 2009 Holden Ve omega Read more about this showcase item here...
  14. 2009 Holden Ve omega

    2009 Holden Ve omega

    2009 Holden Ve omega
  15. ewebz91

    VE Fog Light BCM Reprogramming?

    I read that one but he used a rocker switch, I would prefer to use the standard switch out of an SV6 or similar to keep it all looking original and not having to modify the dash I got the Berlina bezels because I didn't really like the standard ones on the omega. But I figure if I have them, I...
  16. ewebz91

    VE Fog Light BCM Reprogramming?

    Hey guys, Been looking into adding fog lights to my omega wagon, ive checked it and the wiring at the relay is not there. I called a couple of auto elecs and some of them are saying that in order for it to use factory switch, loom etc.. the BCM needs to be reprogrammed. Has anyone else had...
  17. ewebz91

    [VIC] WTB: White Venetians VT-VX Sedan

    ITEM: White Venetians VT-VX Sedan LOCATION: Pakenham, Victoria CONDITION: New or Used PRICE: Negotiable/Make an offer DELIVERY/PICK UP INFORMATION: Willing to travel for pickup PAYMENT OPTIONS: COD CONTACT DETAILS: Text responses on 0423225610 OTHER INFO: PICTURES:
  18. ewebz91

    VX Berlina Series 1 Heater/Air Con Issue

    Hey guys, Last weekend we replaced my heater core and heater tap. Got everything back together and tested it. Found that non of the vents works but the demisters do. Is there anything I can check before ripping out the dash and going through this whole ordeal again? Any help would be...
  19. ewebz91

    pioneer MVH-8350BT handbrake mod

    A lot of head units now have it so u cant simply ground the wire. I put a switch in on mine and it works. Got pulled over when i put the head unit in and had a chat to the cop. He told me that there is nothing wrong with having a switch instead of the handbrake light mod. But if they catch you...
  20. ewebz91

    [VIC] FS/EOI: LSD, Torque Wrench venetians and more to come

    how much would you do for the venetians pickup?
  21. ewebz91

    $800 Budget, Help With System!

    Ive got the BlackAir 6" Components running in my car, and have no complaints with them, been in my car for about 3 months. My mates got a full Vibe setup in his VZ Calais and he hasnt had an issue either.
  22. ewebz91

    7" LCD - DVD CD Player?

    This one doesnt have USB at the front but it is a pretty decent unit still.Its the updated version of what i have in my car. Ive got no complaints with my unit, only thing it doesnt have is navigation. You can get this unit for around $500 - $700. Well worth it imo. Clarion Australia | VX401A
  23. ewebz91

    Calrion VX400A Double Din DVD Headunit

    This model has since been outdated and a new model of it has come out. But they are very much the same and some places you can still find this head unit Features (off the top of my head) 6.5" DVD Touch Screen 6 x RCA Outputs 1 x AV input 1 x Rearview Camera Input 1 x USB Input 1 x AUX...
  24. ewebz91

    $800 Budget, Help With System!

    id reccomend Vibe Black Air 6" Components and Vibe Slick 6" Coaxial. I got the black airs off Amazon for $100. Get the slicks at autobarn for $85 (If you bargain with them a bit). For the rest of the the system id have a look around auto barn. You can always ask them what they think, have a...
  25. ewebz91

    Post your car audio system and pictures

    My System is a bit of a work in progress atm but still does the job Clarion VX400A DVD Head Unit Speakers: Vibe Black Air 6" Components Clarion SRQ1631R 3way Coaxials Subs: 2 x Kicker Impulse 10" 105i Amps: Sony Xplode 600W 4 Channel Clarion APX1301 420W Monoblock Wiring: 4...
  26. ewebz91

    Would this fit a VX!! urgent

    The ones i had are Clarion srq(some random number that i cant remember) They were bout $130 at Autobarn. If u bargain with them a bit you should be able to get them for $100. They are a good cheap setup and pretty easy to install. No mutilation of the speaker pods required :P
  27. ewebz91

    Would this fit a VX!! urgent

    Hey mate Head unit should be no problem but u will have to buy one of those facia things to fill in the gap. The speakers is hard to say. I had 6.5" Clarions in my VX and they went straight in. I Put Vibe 6" in and i had to cut cut away most of my speaker pod. Should be able to fit them in...
  28. ewebz91

    Mount new Head Unit fo VX

    If you're still having this problem i may be able to help. I had trouble mounting mine, My head unit came with a strip of metal. Cut that so one of the holes lines up to a screw hole at the front of the unit. Bend that around to the front and behind the dash facia there are 2 screws. Screw the...
Top