Search results

trying to put VT calipers on the VC My cousin has an ole VC he decided to upgrade the brakes on. Where the car is we have bugger all tools with out half hour drive as it was meant to be unbolt, bolt on job of changing the disks we decided to do it there . We had a battery grinder with us no...

this came off a car last driven in 2008 ole mate tells us this happen while the car was parked in the shed he said he had the bushes replaced in 2007. the rear control arms look about the same we'll get them next. We cheated with the front and brought complete arms with ball joints and bushes...

Is this cluster vc or vh? sorry for the crap picture. Trying to decide if its the original cluster to the car.

when playing pool in a pub if the black goes in off the break who wins? If you say draw and re rack Who puts the next dollar in the table you are playing pool you win or you lose.

I went and visited a mate yesterday he has a vy tonner that he put a ute fuel pump assemberly in the tonner threw the orginal fuel pump away with the assemberly / pick up what ever the correct name for it is before he noticed it was totally different and can't get all the the bottom half of the...

Why was this page deleted? https://whyallanewsonline.com.au/story/2357416/stand-up-with-confidence/ Anyone know why? It was deleted recently as in early this year or late last year.

https://www.v8sleuth.com.au/bluebird-ace-lifts-lid-on-ashtray-turbo-boost-adjuster/?fbclid=IwAR0Ll0Z32Z2rnuBY-rY7z7ZpBD9zSX_3MKxGv_AeS8vnA0csolxLgYYNCDU

I want to rebuild a prop shaft for a 6 cylinder 5 speed vh commodore I have a shaft from a vc 6 cylinder aussie here with a good centre bearing in it and a couple of unis. Will it fit the vh? The vh is 100k's away Id prefer to go there with the shaft and swap it but for some reason I think its...

every time people from Melbourne talk to me nasty I stop and have a piss. (in case you have no sense of humour like my cousin whos current driving to my house to slap me of course i don't). If you like camping theres heaps of dry firewood and hardly anyone there. A couple of years ago there...

I Went and visited my uncle and cousins yesterday. This was brand new the first time I rode in it , when I was a kid I went a lot of places with my uncle he taught me alot about cars working on the family's commodores this one has never had much done to it for the 320 k k's on it now. It hadn't...

What do farmers do with the cows and sheep when the paddocks fill up? If they have no high ground. were they out in the middle of the night in the pissing rain moving them around? the boys git thru half hour earlier in the commodore if I wanted to go the other way I probably would I have...

https://latrobevalleyexpress.com.au/digital-editions/ Im a shitcunt I live in Morwell Im past working to hard and paying back loans I've resigned to the fact I'm going to live and die in shitsville. How is it a good thing my home has gone up $150k more than I payed for it . If I sell up I still...

I found a hilux with a set of kings led spot lights they are wired so the relay that supply's them is slaved off the high-beam wiring just plugs into the existing head light socket the issue is they take 5 seconds or so to turn off once the high beam is switched back to low beam. I guess my...

If you don't care about bullshit personal stories check out the pictures and help me make up a realistic budget and mission list with estimated costs to finish, engineer, register an ek holden with a blue 6. All my mates only like to change oil tyres or relays they tell me to buy another house...

When ole mates vy ute is kangaroo edward the body is rough the inertia worse he wants to spend around $20k what do you blokes tell people to buy for trouble free low maintenance motoring that wont be at the servo everyday.

Whats the correct way to undo the shear bolt on a vs ignition switch the last time I changed an ignition switch on a vs the car was dunger so I covered up abit and got the mig out and tacked a bolt onto it so I could undo it , I would of bugised around for an hour b4 i tuned into bodge. This car...

I'm only asking about ecotec as they have a waste spark ignition do blokes run them on gas only? I was shown a nissan 6 today turbo dedicated gas with a 6AL ignition and 6 ls1 coils on it. It'd broken the keyway on the cam. I'm wondering if it tried to fire the wrong cylinder starting on gas...

I was wasting a bit of time watching youtube the other day out of curiosity does this work with ls1 commodores flick thru it to get the idea of what hes doing. If a bloke wanted to use a ls1 in another car before removing the engine would discounting the bcm while the motor is running generate...

Im after a diagram or some tips on how vn boot spring rods go in. I was tossing off about cleaning up a v6 VS for a couple of weeks its been sitting there, my mate brought a v8 5 speed vn we started cleaning it up the second he came back with it, years ago I used to say who'd ever do up a VN how...

What to do with this one v6 auto the diff is noisy, head trim is sagged ,the bcm doesn't work no central locking windows only go down not up The paint will polish up not too bad 2 better front seats would be easier than cleaning the seats and 4 tyres. If I got the car for free would I make any...

What do you do when the neighbour has his very own dunger yard happening in the backyard of of his shitsville home. This is the view from my friends parents back step. Whats the right way to make him clean the joint up a bit? I've never seen anyone at the house I don't think hes dead inside...

My friend died 20+ years ago his father now wants to go for a ride in his VH its been in his shed ever since apparently he wants to get it roadworthy and register it again. What hope have I got of getting a 6 cylinder VH roadworthy with a 350 holley on it? If I remember correctly it was a NSW...

Gday Im looking for a wiring diagram and a pinout for a VS low level BCM I've searched this forum 20 times and found nothing useful. As all the people I lend things too never bring them back and DVD's and computers don't seam to last more than a couple of years Im not buying another manual for...

Lets ask General Motors for all the workshop manuals. Write them an email or 3000 a week if required Is it possible for Holden to give use the people they f*cked all the workshop manuals for all commodores free to all holden lovers since all that's left is to do shoot the lion anyway. VF...

I cleaned the windows on a ZB while my mate serviced it At 16000 k's . Fleet car driven by a doctor or someone important. Do you think 16000k's out of the front tyres is ok? If it was my car I would of drove on them a bit more but they wouldn't last till the next service so it got 2 new front...

http://www.abc.net.au/news/2018-09-04/melbourne-man-buys-home-with-illegal-structures/10178320 What you all reckon ? As I've only ever sold 1 property and brought another, my oldman never cared about any council permits and made me extend the shed twice, after he died when we were selling his...

My mate is full of **** yesterday he was tossing off about putting a 2.85 head on a vk 3.3 block does it raise the compression? My memory of doing that was it was a waste of time that achieved fuckall anyway my mate was wanking both his dicks yesterday about how good this motor was does this mod...

Whats with people on Gumtree I was trying to sell a couple of bits of crap for me and a mate his au falcon and a couple of old hq motors i had so far Ive had 6 messages from people in NSW and WA asking about the engine numbers not if the engine is any good or if Ill take so much for the Falcon...

Gday gents what software should I be using to interrogate the girl friends v6 Ve Im sick of her coming back from the holden dealer crying the thing is out of warranty. Shes complaining about traction control light and some other light on I would like to read and clear the codes and hopefully...

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

xxxxxxxxxxxxxxxxxxxxxxx

xxxxxxxxxxxxxxxxxxxxxxxxxx

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

xxxxxxxxxxxxxxxxxxxxxxxxxx

xxxxxxxxxxxxxx

I'm looking for a diagram of how a vk headlight switch works my park lights seam to be very dim I think there might be resistance in the headlight switch its self would like to have a diagram in font of me while i prove it, I'm pretty poor so don't want to buy a new switch if that isn't the...

After reading the other thread on how much for a vh. My uncle brought a new car last year and we were wondering what to put on his vh sl apart from the faded paint and the fact it's a 173 5 speed its been garaged its whole life not a dent on it or any rust the inertia is very good most of the...

I cant work out if that was a previous repair or a factory failure. Was it previous repair and who ever done it was a **** welder and ground the weld too thin ? Or factory failure? sorry about the pic I wasn't in much of a photo mood today. It gave way while ole mate was backing out the...

today a bloke I know showed up with a leaking radiator and a new radiator we changed it and washed the front of the motor a bit. After we got it back together the power steering pump is howling and whining I didn't notice it when he appeared, what could we have done to cause it? We unclipped the...

xxxxxxxxxxx