Search results

I ended up checking the resistance of the wires for the CTS from the ecu to the plug if you look at the diagram the wiring is also connected to the TPS so i also checked that plug which all checked out. Purchased a tridon CTS from repco and installed it. Now not throwing any codes and it...

Dang. Car in question is a VS S2 V8 Auto Hopefully someone can help or point me in the right direction.

Wouldn't happen to have the v8 one on hand ?

I had a moment earlier and checked the plug and connections to the temp sensor. It looked OK. I put my meter on the plug with it disconnected and measured 5V with ignition ON. I wriggled the wires along the loom to see if I would drop voltage/connection but nope it was stable at 5V. Does...

Code 15 - ECT Sensor - Voltage Too High - Auto Transmission Only I did the ecu reset. I initially for a code 12 which I believe means the system is ok. I then got the above code....

I've have already checked this and it's not storing anything unfortunately

Unfortunately no access to a good enough scanner for this. Multimeter would be my best bet. Watch for stable voltage increase and decrease with the pedal movements. Thanks!

I'll give that a shot and update hopefully with good news

How can I check for this or simply just replace

Seems fine. Started the car after pulling it out and inspecting for any splits or cracks. Engine light was on but the "issue" wasn't there that time

Chasing my tail with an hesitation issue when opening the throttle. If I gently open throttle is revs up smooth but if I open up anything other than gently/smoothly it will hesitate then will rev up. Every now and then it will also not start on me till it is cold. In recent times I have...

Legend

Hey does anyone know the colour of vt clubsport wheels.? Silver NOT champagne cheers.

I was thinking something new? Not second hand. A good non gen one. Nice and shiny looking.. hoping someone has any feedback

Anyone have any past experiences with replacing the head light and indicators in the front of the car? Fitments, quality and longevity. Looking to purchase a set and would love to hear from anyone who has purchased some and from where..

Forgot to mention they tested fine also

I was mucking around with my speakers today and pulled out the glove box to reach the cross overs. The glove box light was on and I heard a little pop. Problem... Now the boot release button, glove box light, dash lcd screens are off, my heater fan blows on and off quickly when I put the...

I actually didn't know that and now starting to make better sense of it all. Appreciate the knowledge that's been passed on

Sure in your opinion what would be suitable for a stocky 304 with an aggresive/semi aggressive idle with good low to mid range power increase with the only thing needed is headers, pipes and stall. +1 for the rubber

Completely understand and agree with you totally. It definitely doesn't hurt to have peoples opinions and suggestions. I wont be going with any recommendations without consulting multiple people, businesses and reputable engine builders. Just doing my home work :) Edit: It's also great to hear...

Ill give them a call tomorrow and discuss what we have spoken about

Set of good tyres is a must. I've got a live axle in the rear. Can you suggest a cam from crow that will have aggressive idle with good torque and mid range ? I want to stay local with purchases

I think 3.9 is the go mate cheers

Let me know how you go with that

Not sure what's avaliable and from where but I'll find something better than the stocky 3.08

So scrap the 70mm TB as its not avaliable anymore through mace. You dont think the 4503 is a good choice of cam ? Let me tell you abit more of the car and then let me know opinions. I do want a choppier idle than STD but also have better low and mid range power gains. Pacemakers , twin 200...

I just enquired about the 70mm TB and they are not making/modding these anymore. In regards to a different intake this is be a great mod but this will be something I will be looking into with another motor I have sitting in the shed. Ill take into the account the stall as the 4503 starts it...

So associated with the manifold mod and addition of the TB im looking into a crow 4503 with accessories to suit. I think a 2500 stall will be sufficient for the specs of the cam. Ill look into Ace performance for a chip. I was currently looking at Mace for it. Definitely open to looking into it...

I'm thinking this will help the Banana manifolds so regularly referred to as the "heat sinks" . Not chasing numbers but more after efficiency. I will be running the Mace 70mm TB. Any other hints and tips will be appreicated.

So I ended up replacing all the globes throughout the dash cluster down to the cigarette lighter. All of them work and it looks great. I went with a mixture of LED and halogen globes where I could find some and others not easily to find. Im stuck on the climate control globes that light up the...

Thanks ill pop my head in over the weekend and see what they have to offer

Hey mate yes I have access to a press at work so that shouldn't be an issue. Ill just have to do it slowly lugging it to work

Thanks for the info ill see what I can source in regards to the replacement arms. Hopefully someone can shed some light on where to get them. Ill get some prices on the other bushes and see where it all sits with price. Mine are pretty well shot so I think I will go ahead for the longevity for...

Cheaper meaning not as good quality compared to the plastic stuff on the market? Also the trailings are there refurb change over ones from somewhere ?

I thankfully have access to an account holder so longevity and quality is at mind here. Nolathane are known for noise bushes once they dry out ?

Thats awesome thanks that will keep me busy. Is there any companies that sell all of these as a kit or would I need to go to say bursons and ask for all of these individually?

Hi while under the car doing a service and installing my exhaust I noticed alot of the bushes have perished. Im not too savvy about what all these bushes are called so if someone is able to help me identify what bushes there are for the front and rear end I can then purchase them and replace...

Curious to know if the dimmer switch is using a module or resistor to dim the lights in my VS? Any insight would be awesome.

In the process of replacing with the leds ill post up once I've completed it

I would like to change over all my interior globes to LED (as halogens are hard to come by) please advise me is anyone knows of some bad cons. Has anyone done a guide to globe types and sizes for the interior/dash and console?