Recent content by waggin

I'm thinking maybe I can hook up the door loom to the bcm as per the original one I take put and add the power wires to another power wire coming out of the bcm

Sorry, only one going to rear of console

Also I had a look under centre console and there is no spare wiring connectors,only on go I g to the rear or console and one going to around the shifter stick, do I need to splice them to get another power wire for the switches?

Holy it looks complicating, lex I need new wires coming from the bcm to go to the relay then to power window motor harness, is this what u did.

Hi bud, are u able to send some pics through that would be cool so I can have a squiz. Thank you.

Ok so I have checked, the power window relay is empty and no wires behind. The drivers side window relay is empty but has wires behind. The power Windows, power doors is wired with a fuse in it. Does this mean I can only have the drivers side working without wiring anything, and to have all...

Ok so I need to remove centre console see if switch socket is there, then check fuse box and see if spot for power Windows and relays in fuse box, if so I should be ok, if not I have to wire it up so it is, this may be harder than I thought if there is no wiring from baterry to fuse box to the...

What do u mean there was no wiring, so from the door loom to the car panel, or the panel to the bfn to the fuse box in the engine bay, so does it all ha e to be rewired or I ha e to add wires in it to make it work, I'm not very confident in electrical wiring for a car

I ha e decided to install power Windows, I have managed to get switches and regulator and motor for all four out of a Vt sedan going into my Vt wagon, only to find out I may have to change my BCM also, so Iamaged to see what BCM I had and it says 813 mid, do I still need to change the bcm? If...

hi kiwicon, yes i did remove the airbag light with this software, also you can view codes on it as i have done so already but i dont know how to clear them if there is a fault. seems like blind leading the blind here, hehe.

New to this forum, so hello every1, I have purchased a ALDL cable and software from ebay, the software is tunerpro rt, and i bought it to remove an airbag light, however, i can scan the car check temps, air fuel ratio, oxygen sensor etc. but what does it all mean and how do i know if it is...